 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TIP125, TIP126, TIP127 PNP SILICON POWER DARLINGTONS Copyright (c) 1997, Power Innovations Limited, UK DECEMBER 1971 - REVISED MARCH 1997 q Designed for Complementary Use with TIP120, TIP121 and TIP122 65 W at 25C Case Temperature 5 A Continuous Collector Current Minimum hFE of 1000 at 3 V, 3 A B C E q q q TO-220 PACKAGE (TOP VIEW) 1 2 3 Pin 2 is in electrical contact with the mounting base. MDTRACA absolute maximum ratings at 25C case temperature (unless otherwise noted) RATING TIP125 Collector-base voltage (IE = 0) TIP126 TIP127 TIP125 Collector-emitter voltage (IB = 0) Emitter-base voltage Continuous collector current Peak collector current (see Note 1) Continuous base current Continuous device dissipation at (or below) 25C case temperature (see Note 2) Continuous device dissipation at (or below) 25C free air temperature (see Note 3) Unclamped inductive load energy (see Note 4) Operating junction temperature range Storage temperature range Lead temperature 3.2 mm from case for 10 seconds NOTES: 1. 2. 3. 4. TIP126 TIP127 V EBO IC ICM IB Ptot Ptot 1/2LIC 2 Tj Tstg TL VCEO VCBO SYMBOL VALUE -60 -80 -100 -60 -80 -100 -5 -5 -8 -0.1 65 2 50 -65 to +150 -65 to +150 260 V A A A W W mJ C C C V V UNIT This value applies for tp 0.3 ms, duty cycle 10%. Derate linearly to 150C case temperature at the rate of 0.52 W/C. Derate linearly to 150C free air temperature at the rate of 16 mW/C. This rating is based on the capability of the transistor to operate safely in a circuit of: L = 20 mH, IB(on) = -5 mA, RBE = 100 , VBE(off) = 0, RS = 0.1 , VCC = -20 V. PRODUCT INFORMATION Information is current as of publication date. Products conform to specifications in accordance with the terms of Power Innovations standard warranty. Production processing does not necessarily include testing of all parameters. 1 TIP125, TIP126, TIP127 PNP SILICON POWER DARLINGTONS DECEMBER 1971 - REVISED MARCH 1997 electrical characteristics at 25C case temperature PARAMETER V (BR)CEO Collector-emitter breakdown voltage Collector-emitter cut-off current Collector cut-off current Emitter cut-off current Forward current transfer ratio Collector-emitter saturation voltage Base-emitter voltage Parallel diode forward voltage IC = -30 mA (see Note 5) VCE = -30 V V CE = -40 V V CE = -50 V VCB = -60 V V CB = -80 V V CB = -100 V VEB = VCE = V CE = IB = IB = VCE = IE = -5 V -3 V -3 V -12 mA -20 mA -3 V -5 A IB = 0 IB = 0 IB = 0 IE = 0 IE = 0 IE = 0 IC = 0 IC = -0.5 A IC = IC = IC = IC = IB = 0 -3 A -3 A -5 A -3 A (see Notes 5 and 6) (see Notes 5 and 6) (see Notes 5 and 6) (see Notes 5 and 6) 1000 1000 -2 -4 -2.5 -3.5 V V V TEST CONDITIONS TIP125 IB = 0 TIP126 TIP127 TIP125 TIP126 TIP127 TIP125 TIP126 TIP127 MIN -60 -80 -100 -0.5 -0.5 -0.5 -0.2 -0.2 -0.2 -2 mA mA mA V TYP MAX UNIT ICEO ICBO IEBO hFE VCE(sat) VBE VEC NOTES: 5. These parameters must be measured using pulse techniques, tp = 300 s, duty cycle 2%. 6. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts. thermal characteristics PARAMETER RJC RJA Junction to case thermal resistance Junction to free air thermal resistance MIN TYP MAX 1.92 62.5 UNIT C/W C/W resistive-load-switching characteristics at 25C case temperature PARAMETER ton toff TEST CONDITIONS IC = -3 A V BE(off) = 5 V IB(on) = -12 mA RL = 10 MIN IB(off) = 12 mA tp = 20 s, dc 2% TYP 1.5 8.5 MAX UNIT s s Turn-on time Turn-off time Voltage and current values shown are nominal; exact values vary slightly with transistor parameters. PRODUCT INFORMATION 2 TIP125, TIP126, TIP127 PNP SILICON POWER DARLINGTONS DECEMBER 1971 - REVISED MARCH 1997 TYPICAL CHARACTERISTICS TYPICAL DC CURRENT GAIN vs COLLECTOR CURRENT VCE(sat) - Collector-Emitter Saturation Voltage - V 40000 TCS125AA COLLECTOR-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT -2*0 tp = 300 s, duty cycle < 2% IB = IC / 100 -1*5 TCS125AB hFE - Typical DC Current Gain TC = -40C TC = 25C TC = 100C 10000 -1*0 1000 -0*5 TC = -40C TC = 25C TC = 100C 0 -0*5 -1*0 IC - Collector Current - A -5*0 VCE = -3 V tp = 300 s, duty cycle < 2% 100 -0*5 -1*0 IC - Collector Current - A -5*0 Figure 1. Figure 2. BASE-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT -3*0 VBE(sat) - Base-Emitter Saturation Voltage - V TC = -40C TC = 25C TC = 100C TCS125AC -2*0 -2*5 -1*0 -1*5 IB = IC / 100 t p = 300 s, duty cycle < 2% -0*5 -0*5 -1*0 IC - Collector Current - A -5*0 Figure 3. PRODUCT INFORMATION 3 TIP125, TIP126, TIP127 PNP SILICON POWER DARLINGTONS DECEMBER 1971 - REVISED MARCH 1997 MAXIMUM SAFE OPERATING REGIONS MAXIMUM FORWARD-BIAS SAFE OPERATING AREA -100 SAS125AA DC Operation tp = 300 s, d = 0.1 = 10% IC - Collector Current - A -10 -1*0 TIP125 TIP126 TIP127 -0*1 -1*0 -10 -100 -1000 VCE - Collector-Emitter Voltage - V Figure 4. THERMAL INFORMATION MAXIMUM POWER DISSIPATION vs CASE TEMPERATURE 80 Ptot - Maximum Power Dissipation - W 70 60 50 40 30 20 10 0 0 25 50 75 100 125 150 TC - Case Temperature - C TIS120AA Figure 5. PRODUCT INFORMATION 4 TIP125, TIP126, TIP127 PNP SILICON POWER DARLINGTONS DECEMBER 1971 - REVISED MARCH 1997 MECHANICAL DATA TO-220 3-pin plastic flange-mount package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. TO220 4,70 4,20 o 3,96 3,71 10,4 10,0 2,95 2,54 6,6 6,0 15,90 14,55 1,32 1,23 see Note B see Note C 6,1 3,5 0,97 0,61 1 2 3 1,70 1,07 14,1 12,7 2,74 2,34 5,28 4,88 2,90 2,40 0,64 0,41 VERSION 1 VERSION 2 ALL LINEAR DIMENSIONS IN MILLIMETERS NOTES: A. The centre pin is in electrical contact with the mounting tab. B. Mounting tab corner profile according to package version. C. Typical fixing hole centre stand off height according to package version. Version 1, 18.0 mm. Version 2, 17.6 mm. MDXXBE PRODUCT INFORMATION 5 TIP125, TIP126, TIP127 PNP SILICON POWER DARLINGTONS DECEMBER 1971 - REVISED MARCH 1997 IMPORTANT NOTICE Power Innovations Limited (PI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to verify, before placing orders, that the information being relied on is current. PI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with PI's standard warranty. Testing and other quality control techniques are utilized to the extent PI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except as mandated by government requirements. PI accepts no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor is any license, either express or implied, granted under any patent right, copyright, design right, or other intellectual property right of PI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. PI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS. Copyright (c) 1997, Power Innovations Limited PRODUCT INFORMATION 6 |
Price & Availability of TIP127
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |